Briggs and Stratton Throttle Linkage Diagram

A lawnmower used for several years will at some point show signs of wearing out. And you may end up discovering one really common issue because of the constant use, and that’s having the cable extended. Sometimes that just leads to breaking. And if that happens, it gets quite tricky to push the throttle cable.

No matter what problems you are facing, having a Briggs and Stratton throttle linkage diagram to understand that area more clearly, sounds like the right thing to do. And so, here’s some help on that. Enjoy!

Here’s The Briggs and Stratton Throttle Linkage Diagram

So, the throttle part of a lawnmower is basically a combination of many other areas. These are choke linkage, throttle linkage, spring throttle, and so on. When you are having trouble with the area, there’s a good chance any of these parts are basically malfunctioning to cause that.

Briggs and Stratton Throttle Linkage Diagram

About the Briggs and Stratton throttle linkage location, you should be able to find it inside the engine, just close to the governor linkage or spring. The throttle itself stays on the handle. The style is quite similar to a knife.

And it’s usually coming with “T” on end made of plastic. A cable made of steel should be running towards the bracket in the fuel tank. And this is where the assembly of throttle is connected basically.

A lot of people would get lost just right here. It’s hard to remember how the throttle assembly, as well as carb, are connecting with the spring, linkage, or governor.

Also, if you are curious about the difference between throttle and governor link, then it’s with the shape. The throttle linkage is slightly curvy.

While the governor link is straight. Also, a spring sits on top of the governor linkage, however, that’s not the case with the throttle link. So, during observing the linkage, we hope you don’t get confused on which is what.

You May Like This Video Too!

Frequently Asked Questions (FAQs)

How does throttle work on Briggs and Stratton?

The changes in load need to be detected, and for that, there are gears and flyweights right inside the crankcase. And this helps in controlling the engine speed basically. The air-fuel releasing inside the engine gets controlled, and basically closes the throttle from that. With increasing engine load, the spin of the crankshaft becomes slower.

What is the throttle linkage?

The throttle plate is basically the hugest piece there in the throttle body. And it is basically a butterfly valve. In charge of airflow regulating. A throttle cable stays in many vehicles that allow the communication of accelerator pedal motion. And this part stays connected with Briggs and Stratton throttle linkage, so that it can rotate the plate in turn.

Where does governor Spring attach?

There’s a loop right in the governor throttle arm linkage, where you should be able to locate the primary as well as secondary springs clipped. The control bracket of the throttle lever holds the throttle lever in place right in front of the carburetor.
Usually, you need to have the secondary governor spring end unclipped from the arm linkage of the governor throttle by hand for removal. To understand things more clearly, you should take the help of a Briggs and Stratton governor linkage diagram.

Final Thoughts 

No doubt to the fact that having a Briggs and Stratton throttle linkage diagram at least gives you some brief notes on the location of parts and elements. We hope you were able to get things easier, the ones you are trying to find.

However, if that seems hard, maybe call a professional, someone who can physically visit and give your vehicle’s throttle linkage a look. And then tell you exactly what the problem is with some notes on a solution.

It’s actually a better route if you are a person with little to no knowledge of the vehicle’s internal parts.

By admin