How to Shorten a Throttle Cable on a Lawn Mower

How to shorten a throttle cable on a lawnmower? You can shorten the throttle cable of your lawnmower by taking off your entire throttle cable. Then, find out how many draws you require and cut the throttle accordingly. Here, in this article, you will know 2 ways to shorten your lawn mower’s throttle cable.

A braided metal wire that works as an automatic connection is called a throttle cable. It links the gas pedal and your mower engine’s throttle plate. First, however, it opens the throttle while the gas pedal is pressed.

But sometimes, it gets loose, and you may need to shorten it. Why spend your bucks for this while you can do it yourself? Let’s proceed to the further details for a better understanding.

How to Shorten a Throttle Cable on a Lawn Mower?

A lawnmower is a machine that cuts grass at a specific height based on its revolving blade design. Adjusting the lawnmower cable can be troublesome but not impossible either. So, let us introduce you to 2 ways for shortening a throttle cable on your lawn mower machine.

Method 1: Cut Off the Throttle Cable to Shorten your Lawn Mower Throttle Cable

Tools Required Here

The handle of your lawn mower can fail to work if it is broken and may need replacing by a professional. Or you can do it by yourself by following the below stated instructions. Or you can just get this Oregon 60-426 lawn mower throttle cable repair kit.

You can use acid core solder to eliminate existing grease or dirt, then adjust the cable. Close the remaining end with a crimp. Cut off the remaining lawn mower throttle cable end to ensure safety.

Method 2: Make a Loop on the Cable

You can shorten your lawn mower throttle cable by making a loop on it. Use a wrench to perform this task.

You May Like This Video Too!

Frequently Asked Questions (FAQs)

Can you shorten a throttle cable?

If you have a lawn mower and want to reduce the throttle cord, you can do so by following the instructions mentioned above. In addition, if all of the pieces are available and the cable is not frayed inside the outer covering, you can shorten a damaged cable.

How do you adjust the throttle cable on a Briggs and Stratton lawnmower?

Set the throttle to “Fast” or “High” on the throttle lever. With a flat-head screwdriver, undo the screw that supports the bracket that holds the cable. Allow the cable to slide through the support by loosening it enough.

What is the best way to cut the throttle cable?

Wrap a piece of tape around it, label the cut, and use the finest cut-off roller you have on it. Carefully unroll the tape and insert it into the fitting, tightening the screw afterward.


The throttle cable of your lawn mower controls its efficiency as well as workability. However, sometimes the throttle cable may get damaged and need to be replaced or shortened for better efficiency. In this article, we have showcased 2 ways with a step-by-step guide to how to shorten a throttle cable on a lawnmower.

Your engine’s most critical component is the throttle cable. It is essential to the machine’s long-term efficiency. So, we hope now you can shorten your lawn mower’s throttle cable without facing any hassle.

By admin