What is the Scotts Edgeguard Spreader settings? Spreader setting means the rate of product you apply in your garden. The Scott Edgeguard spreader setting refers to the specific product you have to apply while using the ensure.
Using the right spreading is necessary to get the best efficiency. Today, we will talk about the settings for Scotts Edgeguard spreader.
Scotts Edgeguard Spreader Settings- The Right Setting You Should Use
For smoother funneling and landscape projects, the Scotts Edgeguard is the best. Although, you need to know how to use it efficiently. You cannot just randomly put your product and expect good performance. That’s why you need to know the right setting for using a spreader. When using the Scotts Edgeguard Spreader, there is a specific product usage for an assigned area. How to use Scotts Edgeguard Spreader? It’s simple, follow the setting chart.
Below you will see the correct settings for Scotts Edgeguard Spreader for lime, grass seed, and fertilizer.
Scotts Edgeguard Spreader Settings for Grass Seed
| Concern | New Seeding | Overseeding |
| Tall Fescue Mix | 18 | 9 1/2 |
| Sun and Shade Mix | 12 1/2 | 8 1/2 |
| Rye Mix | 15 | 9 1/2 |
The chart above is the settings you can use for Scotts Edgeguard Mini. However, you can still use other Scotts Edgeguard Spreaders with the same settings with minor adjustments. When using the Tall Fescue Mix for newly seeding, ensure the setting is 18, so you get the best efficiency.
On the contrary, the Scotts Edgeguard DLX Spreader settings chart for overseeding when using the Tall fescue is 9 ½. We recommend you increase to 10 if your lawn is more extensive. But 9 ½ can get the work done smoothly without any complications.
If you are using the sun and shade mix for overseeding, the best setting is 8 ½. Furthermore, you can even use nine or ½ if your garden is comparatively larger. While using for new lawns, use 12 ½ or 12. You will get the best output with these settings. Try not to exceed the setting we recommend; otherwise, you will run out of product, or there will be remnants. Either way, they aren’t the best outcome.
Use 15 when using the Rye Mix for newly seeding your garden. Again, if you want to overseed Scotts Edgeguard Mini Spreader settings conversion chart suggests using 9 ½. However, depending on your lawn, you can tinker with it and use 9 or 10.
You can also check the Scotts spreader parts diagram for a better idea of the spreader.
Scotts Edgeguard Spreader Settings For Lime
| Concern | Rate Of Application | Setting |
| Initial | 40 Lbs/ 1000 SF | 7/8 |
| Maintenance | 20 Lbs/ 1000 SF | 2/3 |
To control the Ph level of the ground, you have to use your spreader very smartly when using it with Lime pellets. If you use too much lime, you might disrupt the Ph level of the ground. On the other hand, if you use too little lime, it will take a lot of time before the Ph level comes down to one.
When you use 40lbs of lime pellets per 1000 sq. ft., make sure to use the 7 or 8 sets. Using less than seven will take time to control the Ph, while using more than eight will damage the ground, making it wrong. Meanwhile, for maintenance, use 20 Lbs per 1000 sq. ft. and use the settings 2 or 3. Don’t exceed the setting while you are maintaining the pellets. You will surely get the best output when using this setting with any Scotts Edeguard Spreaders.
Scotts Edgeguard Spreader Settings For Fertilizer
| Concern | Setting |
| Crabgrass Preventer | 4.5 |
| Lawn Food | 5 |
| Weed Control | 4.5 |
In the case of fertilizer, the Scott Edgeguard Spreader tends to use a similar setting for almost all types of furniture with a few minor adjustments. If you want to use the crabgrass preventer, use 4 or 4.5 in the spreader. However, 4.5 is the most optimal setting when using the fertilizer. This setting is applicable when you use it per 1000 SF. Make sure to use 40 Lbs while using 4.5.
For the Lawn Food, the setting you should use is 5. When using 5, you will get the best productivity from your lawn, and the crops or plants you put will grow very nicely. You can also use 4.5 but try not to go lower than that or higher than 5. Keep in mind that this applies to all Scotts Edgeguard Spreaders, including DLX and Mini.
Finally, when it comes to weed control, it’s similar to the crabgrass preventer. Use the setting 4.5 for 40 Lbs per 1000 SF. For 60 Lbs, use 5.5, but only 60lbs when the lawn is more than 1500 Sf. Otherwise, it will damage your property.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
What setting should I use on Scotts spreader?
It depends on what you intend to do. For using fertilizers, the best setting is 4.5 to 5. While for seeding or lime pellets, the setting is entirely different.
What setting should I use on Scotts Edgeguard for grass seed?
Firstly, you need to know what type of grass seed you want to use. Suppose you want to use the Rye mix, then you have to use 15 when it’s for a newer lawn. Again for overseeding, you need to use 9.5.
Conclusion
You must use the right setting while using a spreader. Because if you use the wrong setting, the product you are using won’t be utilized correctly. Hence, there is even a chance it might ruin your lawn. The above shows the Scotts Edgeguard Spreader settings chart for lime pellets, grass, and fertilizer.
Follow the proper settings so that you can have the best lawn. The wrong settings will destroy your yard, so beware of that. Remember, the setting chart above is only applicable for the Scotts Edgeguard. The settings can be different for other model spreaders.