Do you know you need to clean or change the trimmer head of your Redmax weed eater? Now, got frozen; how to replace RedMax trimmer head? You just need to unlock the trimmer head by spinning it and then attach a new one. And we have explained this very vividly here.
People often use a weed eater to trim or brush their lawn areas. Most of them don’t know that the trimmer head must be replaced or cleaned to get the best output after a particular time.
But you must know the proper way to do that; otherwise, you will end up damaging your Redmax weed eater.
How To Replace RedMax Trimmer head
First of all, you must know about the RedMax weed eater parts.
There are mainly two parts to a weed eater. One contains the engine to power the machine and the handle.
And the other part includes a guard and the trimmer head.
Before replacing, get a new trimmer head from online or nearby hardware shops. You can either buy the OEM or an aftermarket trimmer head like the Panari Trimmer Head for Redmax, which is rigid enough.
Now let us enlighten you about the process with some easily explained steps.
First Step: RedMax Trimmer Head Removal
Before stepping to commence, have some necessary tools like a screwdriver.
After that, start according to the steps-
Remember, no matter how many times you spin the head, it won’t unlock if you don’t lock the hole.
Second Step: Attaching the New Trimmer Head
Now, installing the new head trimmer.
There you go. Your new RedMax trimmer head is locked and ready to use.
Give the whole machine a quick check and turn it on. Use it for a while to see the difference in results after attaching the new trimmer head.
How to Change String of the RedMax Trimmer Head
Oh, do you need to change the string in your trimmer head as well? It will save you the cost of buying a new trimmer head. You can buy those strings from any hardware store or online and attach them easily with the trimmer head.
To change the String-
And your weed eater is ready to use.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
Can you change the head on an electric trimmer?
Of course. You can change the head on both electric and gasoline trimmers. The method is the same.
How do you put a universal trimmer head-on?
You can put on a universal trimmer head in the same way as the general ones. Lock the locking hole using a nail or screwdriver. Rotate the trimmer head anti-clockwise to remove. Connect a new one and spin it clockwise to attach tightly with the shaft.
Can I clean my trimmer with water?
Yes, you can use water and detergent also to clean your trimmer head.
What is a fixed line trimmer head?
In a fixed-line trimmer set, you don’t need long strings winding. There are individual lines that you can load and use one after another.
Summing Up
So, now you know how to replace RedMax trimmer head. We also added a small part on how to change the strings on the trimmer head. Think of that as a bonus.
If you follow the whole article, you will be able to easily change the trimmer head on your RedMax weed cutter machine without any hassle.
And always remember to maintain your machines. Cleaning and washing are important so that they give you a long-lasting service.
Also, while buying parts for machines, be careful to buy them from a trusted supplier. Check the parts properly each time you buy them.
And thank you for going through the whole article.