Your riding lawn mower carburetor controls the amount of air and fuel mixture to form a combustion in your engine. When the carburetor isn’t functioning correctly, it can cause your riding mower to sputter, stall and not start. Most of the time, your carburetor problems can be solved by cleaning them.

If you are a little mechanical and don’t mind working with small parts, you can follow my instructions below to clean the carburetor yourself. Your local small engine repair shop is an option to have your carburetor cleaned or rebuilt if you don’t want to tackle the job.

Symptoms of a Bad Carburetor on Your Riding Lawn Mower

When a riding carburetor is acting up, you will notice these symptoms due to your mower running with the incorrect fuel-to-air mixture or having a blockage:

  • Riding mower won’t start
  • Riding mower starts and then dies
  • Riding mower backfires from running lean
  • Riding mower engine is sputtering and running rough
  • Riding mower engine is surging
  • Riding mower is consuming too much fuel

This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

Follow all safety instructions provided in your equipment operator’s manual prior to diagnosing, repairing, or operating.Consult a professional if you don’t have the skills, or knowledge or are not in the condition to perform the repair safely.

Clean a riding lawn mower carburetor

10 Steps to Clean Your Riding Mower Carburetor

Spray Carburetor Cleaner in the Air Intake on Your Riding Mower: You don’t want to take your carburetor apart if it isn’t causing your problem. To identify if you need to take your carburetor apart, remove your air filter from the filter housing.

Spray carburetor cleaner into the air intake and start your riding mower. If your mower starts and then dies, you must take apart your carburetor and clean it.

Gather Tools and Items Required to Clean Your Riding Mower Carburetor

  • Pliers
  • Screwdriver
  • Socket/ratchet set
  • Carburetor cleaner
  • Thick wire
  • Needle nose pliers

Take Photos for Reassembly of Your Riding Mower Carburetor

I highly recommend taking photos during the disassembly of your carburetor. There are so many small parts to your carburetor that it can be hard to remember where every part to when you reassemble it.

Most people have a cell phone available to take photos and easily access them. If you have a camera or phone, take photos of your carburetor before you remove it and during each step of taking it apart.

Shut off Your Riding Lawn Mower Fuel Supply

Use your fuel shut-off valve to stop fuel flow. You will find this valve at the bottom of your fuel tank. If you don’t have a shut-off valve, crimp the line to stop fuel flow. Remove the fuel line from the carburetor.

Remove Your Riding Mower Throttle & Choke Cable

Remove your throttle and choke cables.

Detach the Filter Housing

Remove the hardware that attaches the carburetor to the air filter housing.

Remove the Springs on Your Riding Mower Carburetor

Next, you need to slowly remove the springs. Be careful to not stretch out the springs. You may have to twist the carburetor a bit to get the springs to come off.

Be careful not to tear the gasket located between the engine block and the carburetor. If you do tear it, you will need to replace it with a new gasket.

Remove the Bowl from Your Riding Mower Carburetor

The carburetor bowl stores a little gasoline inside your carburetor. The bowl is located on the bottom of your carburetor and is held on by a screw. Have a rag available to catch any remaining gas in the bowl.

Go ahead and remove the screw and the bowl while taking care not to damage the gasket that sits between the bowl and the carburetor.

This gasket looks like a rubber band. You don’t want any substance such as carburetor cleaner to get on the gasket or you will need to replace it.

Check the Stem for Clogged Holes

There is a little piece that hangs down from the center of your riding mower’s carburetor. This is known as the stem. There are holes in the stem that can become clogged from running old fuel.

When this happens, the stem will not draw fuel up to the jet. Use a flashlight to better see the holes in the stem. Clean the holes with a thick wire to unplug the holes.

Check Your Riding Mower Carburetor for White Crusty Buildup

Check out the carburetor and its parts for a white crusty buildup which is the result of fuel additives including ethanol. Try to remove as much of this crusty material as possible using carburetor cleaner. It is almost impossible to remove all the crusty deposits.

Use the carburetor cleaner to clean any parts that are sticking or clogged.

Reassemble Your Riding Mower Carburetor

Once you have cleaned your carburetor and ensured the float and float needle are moving freely, it’s time to reassemble it. Reference the photos you took earlier when putting your carburetor together to make sure all the small parts get put back in the right places.

Reattach components to your riding mower carburetor including the springs, filter housing, throttle and choke cables (if the mower uses them), and the fuel line.

Fill Your Fuel Tank with Fresh Gas with a Fuel Additive

Start your fuel flow. Use fresh gasoline mixed with a fuel additive, like Sea Foam Motor Treatment, in your riding mower’s fuel tank. Give the fuel a chance to fill the bowl of your carburetor and start your engine.

Read more about why I choose to use Sea Foam to stabilize and clean my fuel system with my article on the advantages of Sea Foam here.

Replace or Rebuild Your Riding Mower Carburetor

Sometimes cleaning your carburetor doesn’t get the carburetor working again. You may have too much buildup or parts of your carburetor may become stuck or damaged. In this case, you will have to rebuild or replace your carburetor.

Check the price for a carburetor rebuild kit and the price for a new carburetor. Sometimes the prices aren’t that far apart and you may choose to replace your carburetor instead of rebuilding it.

When purchasing parts for your carburetor, have your engine’s make and model number available. Many riding lawn mowers use another manufacturer’s engine so you need to have the engine information on hand to ensure you get the right parts.

Riding Mower Problems Could Be More than a Carburetor Problem

A dirty or bad carburetor can be a cause of your riding mower not starting, quitting after starting, and leaking fuel. There are many other items that can cause these problems. To find out more about these causes and how to solve them, check out the links below.

  • Riding mower won’t start
  • Riding mower is leaking gas

Still Having Problems With Your Riding Mower?

As a lawn mower owner, when you own it long enough, you are going to run into different types of problems. This may include problems where your riding mower is smoking, cutting uneven, losing power, not starting, leaking fuel, and more.

Check out this handy guide including charts for common riding mower problems and solutions:
Common Riding Lawn Mower Problems & Solutions.

If you are unable to fix your riding mower or don’t want to attempt a more complicated repair, have your local lawn mower dealership or repair shop for assistance.

By admin