As much as you don’t want to have failures develop in your Bad boy lawn mower, it’s bound to happen. Any mechanical item will wear down and fail over time. You can prevent and prolong many of these problems by regularly servicing your mower.
I put together a list of the most common problems you will see as a Bad Boy lawn mower owner. This is a handy guide to keep on hand to refer to next time you encounter an issue.
The most common Bad Boy lawn mower problems are:
- Bad Boy doesn’t start
- Bad Boy dies while mowing
- Bad Boy is smoking
- Bad Boy has a weak hydrostatic transmission
- Bad Boy won’t drive straight or steer correctly
- Bad Boy won’t move
- Bad Boy is shaking or vibrating
- Bad Boy is cutting uneven
- Bad Boy is leaking gas
Common Bad Boy Lawn Mower Problems & Solutions
Bad Boy Lawn Mower Won’t Start
A Bad Boy lawn mower, like all fuel-powered mowers, requires air, fuel, and spark to start and run. When it lacks any of these items, your mower will fail to start.
This could be a result of old fuel, clogged fuel components, a dirty carburetor, a plugged air filter, or a bad spark plug. Your mower may also fail to start if you have electrical problems including a bad switch, ignition coil, or bad battery.
Detailed information can be found at:
Your Bad Boy Lawn Mower Won’t Start: Solved!
| Cause | Reason for Problem | Solution |
| No gas in the fuel tank | Fuel tank is empty | Fill with fresh fuel |
| Bad or old fuel | Fuel breaks down overtime making your fuel less efficient and prone to clogging the fuel system | Drain the fuel tank and fill it with fresh fuel. Use a fuel additive like Sea Foam to stabilize the fuel and assist with cleaning the fuel system. Use the right fuel. |
| Faulty or clogged fuel cap | The vent in the cap can get clogged causing your tank to form a vacuum restricting fuel flow | Try to clean the cap and remove the clogged vent. Replace the cap if needed. |
| Bad spark plug | Excessively dirty or broken spark plug; bad connection; not gapped correctly | Replace with a new spark plug, secure connections, and ensure it is gapped to manufacturer specifications |
| Plugged air filter | Dirt and grass can plug the air filter preventing airflow | Remove the filter and clean it. Replace the filter if it is in bad condition. |
| Plugged fuel filter | A dirty fuel filter will restrict fuel flow | Replace the fuel filter |
| Bad fuel pump | A failed or leaking fuel pump will no longer create the pressure needed to pump fuel | Replace the fuel pump |
| Blocked fuel lines | Bad fuel deposits and dirt can build up and clog the fuel lines preventing the engine from getting the required fuel | Use a carb cleaner and compressed air to clear the clog out of the fuel line. Replace the line if necessary. |
| Dirty carburetor | The carburetor can become dirty and clogged due to bad fuel and ethanol deposits preventing fuel flow | Clean the components making up the carburetor. Replace if needed. |
| Bad battery or loose & dirty terminals | A dead battery, loose cables, or corroded terminals can cause starting problems | Charge your battery and replace it if it won’t hold a charge. Make sure your cables are tight and clean the corrosion from terminals. |
| Bad safety switch | Safety switches are a safety measure that exists to prevent your mower from starting in certain situations. When a switch fails, your mower may not start. | Test and replace faulty safety switch |
| Bad ignition switch or coil | Your mower will not start when either the ignition switch or coil is bad | Test and replace a bad switch |
| Broken recoil | A pull start mower may have a damaged or broken recoil preventing the recoil to initiate starting your engine | Check the recoil to see if it can be restrung or broken parts, like the pulley, can be replaced. Replace the recoil assembly if needed. |
Bad Boy Lawn Mower Loses Power and Dies
A Bad Boy mower can lose power and shut off when the mower has a fuel or air restriction from running bad fuel that clogs fuel components or from using a plugged air filter.
Your mower may also shut down when it overheats. Overheating can be caused by a lack of air in the engine, a plugged engine cooling fan, or an insufficient engine oil level.
Not only is it important to check for items that can restrict air and fuel that can cause your mower to overheat, but you also need to look at your battery, charging system, spark plug, and ignition coil as well. These items can be the culprit of your mower’s running problem.
Detailed information can be found at:
Your Bad Boy Mower Starts Then Dies
| Cause | Reason for Problem | Solution |
| Bad fuel | Fuel breaks down overtime making your fuel less efficient and prone to clogging the fuel system and engine damage | Drain the fuel tank and fill it with fresh fuel. Use a fuel additive like Sea Foam to stabilize the fuel and assist with cleaning the fuel system |
| Plugged air filter | Dirt and grass can plug the air filter preventing airflow | Remove the filter and clean it. Replace the filter if it is in bad condition. |
| Dirty or broken cooling fins | Cooling fins get packed with dirt, oil, and grass not allowing air to effectively cool the engine block | Replace broken fins and clean the cooling fins. |
| Clogged fuel lines or filter | Bad fuel deposits and dirt can build up and clog the fuel lines preventing the engine from getting the required fuel | Use a carb cleaner and compressed air to clear the clog out of the fuel line. Replace a plugged fuel filter. |
| Dirty carburetor | The carburetor can become dirty and clogged due to bad fuel and ethanol deposits preventing fuel flow | Clean all components making up the carburetor. Replace if needed. |
| Too Much Engine Oil | Too much engine oil increases pressure in the crankcase causing it to overheat and die | Correct your engine oil level by removing a little oil |
| Bad Spark Plug | Dirty or damaged spark plug causes the plug to foul out and cause intermittent running problems. | Clean or replace spark plugs if needed. Ensure spark plug wires are securely attached and the plug is gapped correctly. |
| Faulty Ignition Coil | Windings on the coil can separate and short out a bad ignition coil | Check for a break in the continuity using an ohm meter and replace is found bad |
| Choke is in the Wrong Position | A choke is used for cold starts. The choke can cause your engine to shut off when it continues to restrict airflow after the engine warms. | Make sure the choke is in the correct position |
| Bad Gas Cap or Rollover Vents | A Bad Boy mower will vent the tank to allow air to pass through. When the vents get plugged, the fuel tank will cause fuel restrictions. | Replace a fuel cap or rollover vents when they become clogged and no longer vents |
| Clogged Mower Deck | Clogged mower deck causes a strain on the engine causing it to work hard and possibly shut down | Periodically scrape your mower deck to keep it clean |
Bad Boy Lawn Mower is Smoking
Smoking can be alarming. It may be the result of water in the fuel system or oil burning off a hot component. An engine oil leak or spill can cause smoke when the oil burns off of a hot component like the engine or muffler.
A smoking Bad Boy mower may be the result of a plugged air filter, insufficient engine oil level, engine gasket leak, valve train problem, or piston ring problem.
Detailed information can be found at:
Why Your Bad Boy Lawn Mower is Smoking – Article Coming Soon
| Cause | Reason for Problem | Solution |
| Plugged air filter | Dirt and grass can plug the air filter preventing airflow | Remove the filter and clean it. Replace the filter if it is in bad condition. |
| Too much oil in the crankcase | Excessive oil can cause pressure to build in the engine allowing oil to get into the cylinder through the valve train | Drain a little engine oil until it is at the manufacturer’s recommended oil level. |
| Engine oil level is too low | Lack of oil can increase friction in your engine causing extreme heat. | Bring to a small engine repair shop to inspect engine damage. You can try adding oil, but it is often too late to this fix your engine problem. |
| Internal problems including the piston ring, valve train, or engine gasket | Internal engine problems can have a detrimental effect on your mower if they are not caught soon enough and fixed. | Bring your Bad Boy mower to your local small engine repair shop for troubleshooting |
Bad Boy Lawn Mower Has a Weak Hydrostatic Transmission
A hydrostatic transmission on a Bad Boy lawn mower can feel weak from the use of a bad hydraulic belt or pulley. Old hydraulic oil or not having enough oil in the hydraulic tank can also result in a weak transmission.
Note: Some transmissions are non-serviceable. This means you are unable to change the hydraulic oil because the system is sealed.
Bring your mower to your local lawn mower repair shop or Bad Boy dealership when you have problems with a non-serviceable hydraulic system.
| Cause | Reason for Problem | Solution |
| Bad drive belt | A bad drive belt can cause your pump not to work efficiently | Replace a frayed, cracked, or worn belt |
| Bad tensioner pulley | When a tensioner pulley fails, it fails to keep tension on the drive belt | Replace the pulley and grease the tensioner arm |
| Low or old hydraulic oil | Low or old hydraulic oil can fail to lubricate the hydraulic system causing your hydraulic system to seem weak | Change your hydraulic oil at regular intervals as recommended by Bad Boy. Check your hydraulic oil periodically to ensure your hydraulic fluid is full. |
Bad Boy Lawn Mower Won’t Drive Straight or Steer Correctly
Several items can affect your Bad Boy mower’s steering including incorrect tire pressures and worn steering dampers. It is good to check the tracking on your mower.
When the unit is not tracked correctly, your mower can veer off to one side and not drive straight.
| Cause | Reason for Problem | Solution |
| Incorrect tire pressure | Unequal tire pressure can cause your mower to pull to one side. | Check tire pressures and keep them filled to the manufacturer’s spec. Tires on each side of your mower require equal pressure. |
| Bad dampers on zero turn | Bad dampers will cause your mower to jerk to one side when moving forward | Replace with a new damper |
| Tracking adjustment needed on zero turn | When one tire is moving faster than the other, your mower can pull to one side | Adjust the speed adjustment bolt to change the rotation speed of the tire. Refer to your owner’s manual. |
Bad Boy Lawn Mower Won’t Move
Before you check anything on your Bad Boy mower, first check to drive release arms are not the cause of your moving problem. These arms are located at the rear of your mower on the right and left hand.
The arms will be pulled out to place your mower in the neutral position to disengage the hydros so you can manually roll the mower. Make sure these arms are in the operating position.
Note: Some Bad Boy mowers use a bypass actuator screw on each transaxle housing to disengage the hydrostatic transmission. Refer to your owner’s manual to determine which type of valve you own.
A bad drive belt, broken tensioner spring, or a worn tensioner pulley can all cause your Bad Boy mower not to move. A problem in your hydraulic system where the fluid is hot, at a low level, or air is caught in the system can cause your mower to move slowly or not move at all.
Again, some hydraulic systems are sealed so you won’t be able to work on them. Take your mower in for repair at your local Bad Boy mower dealership.
You may also want to check your drive release levers. If they are not in the operating position, your mower will not move.
Detailed information can be found at:
9 Reasons Your Mower Won’t Move or Go Forward
| Cause | Reason for Problem | Solution |
| Drive release lever in the wrong position | The drive release arms allow hydrostatic mowers to roll freely | The drive-release arms must be in the operating position. |
| Drive pump belt is worn | The mower won’t move if your drive belt has fallen off. It could also not move if the belt is worn. | Replace a worn or cracked belt. Make sure the belt is securely around the pulleys. |
| Bad tensioner pulley | The bearing in the tensioner pulley can fail | Replace the tensioner pulley |
| Missing idler arm spring | If the idler arm spring breaks or goes missing, it can no longer place tension on the drive belt | Replace the broken or missing spring |
| Low or old hydraulic oil | Low or old hydraulic oil can fail to lubricate the hydraulic system causing your hydraulic system to seem weak | Change your hydraulic oil at regular intervals as recommended by Bad Boy. Check your hydraulic oil periodically to ensure your hydraulic fluid is full. |
| Hot hydraulic fluid | Hot hydraulic fluid can be a sign of damage to your hydrostatic transmission system | Let your hydraulic oil cool. If you find your mower runs fine when it is cold, but becomes weak when the hydraulic system gets hot, have your mower checked at your local Bad Boy dealership. |
| Air in the hydraulic system | Air must be bled from the hydraulic system after changing your hydraulic fluid or the mower will not be able to move at normal speeds | Follow Bad Boy’s procedures for changing hydraulic fluid and bleeding air from the system as outlined in your owner’s manual. |
Bad Boy Lawn Mower is Vibrating
Your Bad Boy mower naturally vibrates when operating normally. This vibration can intensify when there are loose or broken parts on your mower or your mower has worn linkages, a bad clutch, or debris stuck in your mower.
Even the smallest little item can cause a significant vibration so inspect your mower closely.
Bad deck components can also cause your Bad Boy mower to shake. This can from unbalanced mower blades; worn bearings in the spindle housings and pulleys; a worn belt; or bent brackets.
Detailed information can be found at:
Your Bad Boy Lawn Mower is Vibrating
| Cause | Reason for Problem | Solution |
| Loose or missing engine mounting bolts | Engine bolts are used to reduce the vibration of the mower when the engine is running | Secure engine bolts and replace any missing bolts |
| Clutch is bad | When there is bearing failure and it falls out of the clutch it can cause vibration. A manual engagement clutch can have a bushing and linkages that can fail. | Replace the clutch |
| Unbalanced or damaged mower blades | Damaged and unbalanced blades can send a vibration through your mower. Blades must be balanced before installing | Replace any damaged blades and make sure they are balanced. |
| Material wrapped around the blade spindle | Foreign materials like string or long weeds can get wrapped around your blade shaft causing vibration | Remove all debris and items wrapped around the blade shaft. Check for spindle damage. |
| Bad spindle housing bearings | Vibration can be caused by a bad bearing in the spindle housing. | Replace the bearing in the spindle housing or replace the whole spindle housing assembly |
| Worn pulleys or deck belt | Check deck belt and pulleys for wearing of the belt and bearing failure in the pulleys | Replace any damaged or worn belts and pulleys |
| Debris lodged in mower | The smallest little things can cause your Bad Boy to excessively vibrate. Check over your mower for debris stuck in the deck or mower. Don’t overlook the small stuff. | Check over your mower deck and mower for any place small items can be stuck in your mower. Remove these foreign materials. |
Bad Boy Lawn Mower Has a Bad or Uneven Cut
An uneven cut with your Bad Boy mower isn’t always a problem in the mower deck. It can be something as simple as a low tire that can make you’re your mower not sit level.
Always check the tire pressure first and then move on to looking at your mower deck.
Detailed information can be found at:
Reasons Your Bad Boy Lawn Mower Cuts Uneven
| Worn mower blade | Uneven tire pressures | Engine speed is too low |
| Bent mower blade | Unleveled mower deck | Ground speed is too fast |
| Blade installed wrong | Bent blade spindle or spindle bearing | Damaged deck shell |
| Clogged Mower Deck | Worn deck pulleys or belt | Operator error |
Bad Boy Lawn Mower is Leaking Gas
Locating the actual spot your Bad Boy lawn mower is leaking can be more challenging than you might think. You may not notice you have a gas leak until you see a trail of burnt grass or smell a strong odor in your storage shed.
By the time you get to look at your mower, the leaked fuel may have already evaporated into the air leaving no clues.
Your mower can develop leaks in the fuel system because old grass degrades your components over time. It can make mechanical parts fail or cause plastic housings to become weak and leak.
Detailed information can be found at:
Your Bad Boy Mower is Leaking Gas
| Cause | Reason for Problem | Solution |
| Dirty of Failed Carburetor | The carburetor can collect a buildup of substances remaining from old gas that can cause blockages or parts failures | Clean the carburetor and replace any damaged parts |
| Old Fuel Filter | Filter can become plugged | Replace fuel filter |
| Bad Fuel Pump | Pump can wear and deteriorate over time and may begin leaking at the seams | Replace the fuel pump |
| Bad Fuel Tank | A poly tank can leak at the seams of the tank. | Replace the fuel tank. |
| Bad Fuel Shut-Off Valve | Metal and plastic shut-off valves are prone to leaking | Replace the shut-off valve |
| Cracked Fuel Lines | Rubber fuel lines become dry and cracked causing gas to leak | Replace the fuel lines |
| Bad Seal in the Gas Cap | The gas cap seal can fail and no longer seal allowing gas to splash out of the fuel tank around the gas cap | Replace the gas cap |